Embird Embroidery Software
Upgrade 2017

Inserting and Removing Embird  Password

This tutorial explains how to enter the registration password into Embird, so that it stops to expire and turns from evaluation (demo) version into full version. It also explains how to enter the registration numbers for plug-ins (Alphabets, Font Engine, Cross Stitch, Digitizing Studio, Sfumato Stitch, Iconizer). It is supposed that you already have received an e-mail from us, with text form of the password. The following steps explain what to do with this password.

Note: Another way of inserting passwords into Embird is to use the PASSWORD.KLC file attached to the e-mail which you receive from us after purchasing Embird registration - this is explained in Inserting Registration Password from PASSWORD.KLC file tutorial.

Inserting Main Embird Password from E-mail

1 - Run your e-mail software (Microsoft Outlook, Netscape Communicator, etc.) and open the e-mail with passwords which you have received from us after paying for Embird registration at http://www.embird.net/sw/embird/register.htm. Typically, you would receive two e-mails, containing different forms of password. Choose the e-mail without attachment, containing the text form of the password (Picture No. 1).

Picture No. 1

Embird Tutorial - Inserting and Removing Embird  Password

2 - Highlight the registration password and depress CTRL and C keys simultaneously to copy the selected text (password) into clipboard. If you don't know how to copy the text into the clipboard, please read the following: Put the mouse at the beginning of password and click the left mouse button, holding it down while you drag over the password. At the end of password, let go of the mouse button. Password should be highlighted. (If you goof, click the mouse button once to unhighlight, then start over.) While it is highlighted, hold down the Ctrl key and hit the letter "c". This copies the password to an invisible clipboard.

3 - Run Embird and select "Help -> Registration" command from the main menu (Picture No.2).

Picture No. 2

Embird Tutorial - Inserting and Removing Embird  Password

4 - A dialog box will appear on the screen. Move mouse pointer to the box for entering password and click the left mouse button to focus this box (Picture No. 3).

Picture No. 3

Embird Tutorial - Inserting and Removing Embird  Password

5 - Depress CTRL and V keys simultaneously to paste the password from clipboard into this box. Then click "Register" button to continue (Picture No. 4).

Picture No. 4

Embird Tutorial - Inserting and Removing Embird  Password

6 - Embird will check the password. Wait several seconds until the password validation process is finished.

Inserting Plug-in Registration Number from E-mail

1 - Install the plug-in which you would like to register. Find more information in Installing Plug-ins tutorial.

2 - Run Embird, it will start in "Manager" mode.

3 - Select "Help -> Installed Plug-ins" command from the main menu.

4 - A dialog box containing the list of installed plug-ins will appear on the screen (Picture No. 5).

5 - Type in the number we have sent you (see the e-mail in Picture No. 1 above) into the "Registration Number" cell which corresponds to the plug-in which you would like to register.

6 - Click "OK" button to close this dialog box.

Picture No. 5

Embird Tutorial - Inserting and Removing Embird  Password

Checking Embird Registration

1 - Run Embird, it will start in "Manager" mode.

2 - Check the blue bar at the top of Embird Manager window - your name should be displayed there in registered Embird.

3 - Check whether plug-ins are installed and registered by selecting "Help > Installed Plug-ins" command from the main menu (Picture No. 6).

Picture No. 6

Embird Tutorial - Inserting and Removing Embird  Password

Removing All Password from Embird

1 - Run Embird and select "Help -> Registration" command from the main menu.

2 - A dialog box will appear on the screen. Depress CTRL and ALT keys simultaneously and while holding them down click the "Register" button (Picture No. 7).

Picture No. 7

Embird Tutorial - Inserting and Removing Embird  Password

3 - Confirm the password removal by clicking "Yes" button (Picture No. 8).

Picture No. 8

Embird Tutorial - Inserting and Removing Embird  Password

4 - All Embird passwords will be removed and Embird will close. If you run it again, you will see in the blue bar at the top of Embird Manager window that Embird is unregistered.

Back to Embird Tutorial Contents